Welcome

Our advice

New CNC Sport DMF and twin disc clutch set for BMW E60/E61/E83/E53 M57 3.0D
TOP
New CNC Sport DMF and twin disc clutch set...

New CNC Sport DMF and twin disc clutch set for BMW E60/E61/E83/E53 M57 3.0D

Scope of delivery:

  • CNC DMF X427-01
  • 2-Disc Clutch XDK-64121 / Configurable
  • Bolt Set for Flywheel and Pressure Plate
  • Release Bearing

 

from 1.690,00 EUR
2 discs clutch kit for N55
TOP
2 discs clutch kit for N55

2 discs clutch kit for N55

Scope of delivery:
Steel flywheel
Intermediate disk pre-assembled
Friction disc module as configured
6 screws for the pressure plate
6 screws for the flywheel
If you are not sure which set suits you, have a look here:

Selection guide

 

from 1.456,41 EUR
1.8T 02M 6 speed 2 discs clutch kit for Audi / VW
TOP
1.8T 02M 6 speed 2 discs clutch kit for Audi...

2 discs clutch kit for Audi / VW 1.8T 02M 6 speed

Audi, VW, Seat & Skoda with 6 speed gearbox 02M

Scope of delivery:

  • Steel flywheel
  • Intermediate disk pre-assembled
  • Friction disc module as configured
  • 6 screws for the pressure plate
  • 6 screws for the flywheel

Not included:
release bearing:  3182 654 150 is required <-

If you are not sure which set suits you, have a look here:

Selection guide

from 1.027,41 EUR
996-997
TOP
Gt2 GT3 2 disc clutch kit for Porsche 996...

Gt2 GT3 2 disc clutch kit for Porsche 996 Turbo 997 Turbo 

Scope of delivery:

  • Steel flywheel 8,5kg
  • No pedal limitation required
  • Spring-loaded or rigid friction discs
  • 9 screws for the pressure plate
  • 9 screws for the flywheel
  • Normal start-up
  • Freely selectable torque
from 3.087,41 EUR
Steel flywheel for BMWM50 with 228mm clutch
TOP
Steel flywheel for BMWM50 with 228mm clutch...
   Steel-Flywheel fits for BMW M50 engines with 228mm clutch

works in models like:
BMW E36, E46, E39, E38, 
  • only 6.1kg
  • new ring gear
  • fine balanced
from 379,00 EUR

Checkout our Instagram or/and Facebook!

New product

Reinforced pressure plate &sinter friction disc for BMW M54 N52 - slightly increased pressure point - no casting material
NEW
Reinforced pressure plate &sinter friction...
**Reinforced pressure plate and organic disc for BMW –
Maximum power transmission for the highest loads**
  • no casting material
  • slightly increased pressure point
  • fine balanced
  • without self adjusting
  • sinter friction disc without torsional damper
  • transmitable torque: 700Nm
  • for dmf and smf (dualmass flywheel and single mass flywheel)
639,00 EUR
CNC DMF & 2 Disc Clutch Kit from 2009 for BMW N54 
NEW
CNC DMF & 2 Disc Clutch Kit from 2009 for...

CNC DMF & 2 Disc Clutch Kit from 2009 for BMW N54 

Scope of delivery:

  • CNC Dual Mass Flywheel New Part
  • Intermediate disc pre-assembled
  • Friction disc module as configured
  • 6 screws for the printing plate
  • 6 pieces of screws for the flywheel
  • Release Bearing

       -Made in Germany-
We develop ourselves, make the drawings, manufacture on state-of-the-art CNC machines, assemble in our production hall and then every component is finely balanced in order to be able to offer you this quality at all

from 1.790,00 EUR
CNC DMF & 2 Disc Clutch Kit for BMW N55 -6 bolts
NEW
CNC DMF & 2 Disc Clutch Kit for BMW N55...

CNC DMF & 2 Disc Clutch Kit  for BMW N55 - 6 bolts

Scope of delivery:

  • CNC Dual Mass Flywheel New Part
  • Intermediate disc pre-assembled
  • Friction disc module as configured
  • 6 screws for the printing plate
  • 6 pieces of screws for the flywheel
  • Release Bearing

       -Made in Germany-
We develop ourselves, make the drawings, manufacture on state-of-the-art CNC machines, assemble in our production hall and then every component is finely balanced in order to be able to offer you this quality at all

from 1.790,00 EUR
Reinforced pressure plate & organic friction disc with damper for BMW E36/E46 - slightly increased pressure point - no casting material- SMF only
NEW
Reinforced pressure plate & organic friction...
**Reinforced pressure plate and organic disc for BMW –
Maximum power transmission for the highest loads**
  • no casting material
  • slightly increased pressure point
  • fine balanced
  • without self adjusting
  • organic friction disc with torsional damper
  • transmitable torque: 550Nm
  • for single mass application only
579,00 EUR
Reinforced pressure plate &sinter friction disc for BMW M54 N52 - slightly increased pressure point - no casting material
NEW
Reinforced pressure plate &sinter friction...
**Reinforced pressure plate and organic disc for BMW –
Maximum power transmission for the highest loads**
  • no casting material
  • slightly increased pressure point
  • fine balanced
  • without self adjusting
  • sinter friction disc without torsional damper
  • transmitable torque: 700Nm
  • for dmf and smf (dualmass flywheel and single mass flywheel)
639,00 EUR
Reinforced pressure plate & organic friction disc without damper for BMW M54/N52 - slightly increased pressure point - no casting material-
NEW
Reinforced pressure plate & organic friction...
**Reinforced pressure plate and organic disc for BMW M54/N52 –
Maximum power transmission for the highest loads**
  • no casting material
  • slightly increased pressure point
  • fine balanced
  • without self adjusting
  • organic friction disc with torsional damper
  • transmitable torque: 550Nm
  • for single- and dual- mass application
539,00 EUR
Reinforced pressure plate &sinter friction disc with damper for BMW E36/E46 - slightly increased pressure point - no casting material- SMF only -
NEW
Reinforced pressure plate &sinter friction...
**Reinforced pressure plate and organic disc for BMW –
Maximum power transmission for the highest loads**
  • no casting material
  • slightly increased pressure point
  • fine balanced
  • without self adjusting
  • sinter friction disc with torsional damper
  • transmitable torque: 700Nm
  • for single mass application only
679,00 EUR
Reinforced pressure plate & organic friction disc with damper for BMW E36/E46 - slightly increased pressure point - no casting material- SMF only
NEW
Reinforced pressure plate & organic friction...
**Reinforced pressure plate and organic disc for BMW –
Maximum power transmission for the highest loads**
  • no casting material
  • slightly increased pressure point
  • fine balanced
  • without self adjusting
  • organic friction disc with torsional damper
  • transmitable torque: 550Nm
  • for single mass application only
579,00 EUR
Reinforced pressure plate for BMW - slightly increased pressure point - no casting material
NEW
Reinforced pressure plate for BMW - slightly...
**Reinforced pressure plate for BMW – Maximum power transmission for the highest loads**

 

  • no casting material
  • slightly increased pressure point
  • fine balanced
  • without self adjusting
  • organic 550Nm - sinter 700Nm
  • only pressure plate
339,00 EUR
CNC DMF & 2 Disc Clutch Kit for BMW S55B30/N55 M3 (F80) M4 (F82/F83) M2 (F87)
NEW
CNC DMF & 2 Disc Clutch Kit for BMW S55B30/N55...

CNC DMF & 2 Disc Clutch Kit  for
BMW S55B30/N55  M3 (F80) M4 (F82/F83) M2 (F87)

Scope of delivery:

  • CNC Dual Mass Flywheel New Part
  • Intermediate disc pre-assembled
  • Friction disc module as configured
  • 6 screws for the printing plate
  • 6 pieces of screws for the flywheel
  • Release Bearing

       -Made in Germany-
We develop ourselves, make the drawings, manufacture on state-of-the-art CNC machines, assemble in our production hall and then every component is finely balanced in order to be able to offer you this quality at all

from 1.899,00 EUR
CNC DMF & 2 Disc Clutch Kit for BMW N55 -6 bolts
NEW
CNC DMF & 2 Disc Clutch Kit for BMW N55...

CNC DMF & 2 Disc Clutch Kit  for BMW N55 - 6 bolts

Scope of delivery:

  • CNC Dual Mass Flywheel New Part
  • Intermediate disc pre-assembled
  • Friction disc module as configured
  • 6 screws for the printing plate
  • 6 pieces of screws for the flywheel
  • Release Bearing

       -Made in Germany-
We develop ourselves, make the drawings, manufacture on state-of-the-art CNC machines, assemble in our production hall and then every component is finely balanced in order to be able to offer you this quality at all

from 1.790,00 EUR
CNC DMF & 2 Disc Clutch Kit until 2008 for BMW N54 -8 bolts
NEW
CNC DMF & 2 Disc Clutch Kit until 2008 for...

CNC DMF & 2 Disc Clutch Kit until 2008 for BMW N54 - 8 bolts

Scope of delivery:

  • CNC Dual Mass Flywheel New Part
  • Intermediate disc pre-assembled
  • Friction disc module as configured
  • 6 screws for the printing plate
  • 8 pieces of screws for the flywheel
  • Release Bearing

       -Made in Germany-
We develop ourselves, make the drawings, manufacture on state-of-the-art CNC machines, assemble in our production hall and then every component is finely balanced in order to be able to offer you this quality at all

from 1.790,00 EUR
CNC DMF & 2 Disc Clutch Kit from 2009 for BMW N54 
NEW
CNC DMF & 2 Disc Clutch Kit from 2009 for...

CNC DMF & 2 Disc Clutch Kit from 2009 for BMW N54 

Scope of delivery:

  • CNC Dual Mass Flywheel New Part
  • Intermediate disc pre-assembled
  • Friction disc module as configured
  • 6 screws for the printing plate
  • 6 pieces of screws for the flywheel
  • Release Bearing

       -Made in Germany-
We develop ourselves, make the drawings, manufacture on state-of-the-art CNC machines, assemble in our production hall and then every component is finely balanced in order to be able to offer you this quality at all

from 1.790,00 EUR
Transparent pixel